Sass Compiling Error

custom.scss
"Only 1 argument allowed, but 2 were passed.: custom.scss on line 480, at column 3"

1941 Willys - Precision Car Restoration

1941 Willys

The willys kit car that we are building is here in the shop.

1941 Willys

Motor and Tranny are mocked up for the Willys.

1941 Willys

Getting ready to cut out the rear wheel wells for the 1941 Willys.

1941 Willys1941 Willys

Work continues on adjusting the rear wheel openings and the scoop is in for the hood.

1941 Willys Kit Car1941 Willys Kit Car1941 Willys Kit Car1941 Willys Kit Car

License plate opening is fabricated for the Willys.

1941 Willys

Sanding down the body and working on adjusting the hood for the scoop.

1941 Willys Kit Car1941 Willys Kit Car1941 Willys Kit Car

Mike is glassing the transmission tunnel and finishing up the scoop for the hood.

1941 Willys Kit Car1941 Willys Kit Car

The chassis is painted black for the Willys and everything is starting to get reassembled.

1941 Willys Kit Car1941 Willys Kit Car1941 Willys Kit Car

The Willys has been put in Raderal and Mike is now blocking everything down.

1941 Willys Kit Car1941 Willys Kit Car1941 Willys Kit Car1941 Willys Kit Car

Mike has put the body on the chassis so he can fit the front clip and the hood.

1941 Willys Kit Car

Dan is finishing up the exhaust for the 1941 Willys Kit Car

1941 Willy's Kit Car1941 Willy's Kit CarThe Willy’s is in the booth getting masked off for primer.  You can also see in the pictures where Mike has already applied the undercoating.

1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car

The Willy’s is primed and the chassis for the trailer is painted.

1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car

The body of the willys is ready to be blocked for paint, Dan is working on sanding all the loose panels for the vehicle and the trailer is primed and ready for paint.

1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car

The trailer for the Willy’s is painted and Dan has started to cut in the doors, deck lid, hood and is painting the loose panels.

1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car

Dan and Matt are working on sanding the panels for the Willy’s to get it ready for paint.

1941 Willy's Kit Car1941 Willy's Kit Car

The chassis is getting new brake lines installed today and the body is getting ready for paint.

1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car

The steel brake lines are getting ran today and the body and all panels are in the booth getting painted.

1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car

The engine and tranny are set in the chasses and the flames are laid out and painted for the body.

1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car

The Willy’s is painted, clear and getting set back on the chassis.

1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car

The trunk is prepped to allow the gas tank and the doors are hung.  Dan is now getting ready to install the wiring harness.

1941 Willy's Kit Car1941 Willy's Kit Car

The fuel cell is getting installed and Dan has started on the wiring.

1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car

Continuing on wiring.

1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car

Dan continues to work on hooking up wiring and linkages.

1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car

Test fitting the steering column and seat.

1941 Willy's Kit Car

The dash is installed for the Willy’s and Mike is working of fabricating the custom center console.

1941 Willy's Kit Car

Dan is sanding and buffing the Willy’s and we are also working on installing the power seat tracks.

1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car

Dan continues to sand and buff, John is working of fabricating the battery box holder and tie down and Mike is working still on the center console.

1941 Willy's Kit CAr1941 Willy's Kit CAr1941 Willy's Kit CAr1941 Willy's Kit CAr

The interior is in for the Willy’s and the front clip has been undercoated.

1941 Willy's Kit Car1941 Willy's Kit Car

Dan is working of finishing off the fabrication of the radiator brackets.

1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car

Dan is running all the a/c, heating and cooling lines and they have installed the front lights. Mike is also working on building the exhaust today.

1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car1941 Willy's Kit Car

Dan is finishing up the exhaust for the 1941 Willys Kit Car

1941 Willy's Kit Car1941 Willy's Kit Car

Hood and interior are going in the Willy’s

1941 Willy's1941 Willy's1941 Willy's

The trunk hinges are installed and the rear fenders are getting installed after buffing of the vehicle.

1941 Willy's Kit Car1941 Willy's Kit Car

The drivetrain is fully assembled for the Willys and running.

1941 Willys Kit Car

The 1941 Willys kit car is done and ready for delivery.  Keeping watching the local shows and national magazines as I think you will be seeing a lot of this vehicle.

1941 Willys Kit Car1941 Willys Kit Car1941 Willys Kit Car1941 Willys Kit Car1941 Willys Kit Car1941 Willys Kit Car

Installing the new custom Griffen radiator and Flex-a-lite fan.

1941 Willys Kit Car

,