Sass Compiling Error

custom.scss
"Only 1 argument allowed, but 2 were passed.: custom.scss on line 480, at column 3"

1967 Toyota Landcruiser - Let the transformation begin - Precision Car Restoration

1967 Toyota Landcruiser – Let the transformation begin

In a nut shell we are putting the body of a 1967 Toyota Landcruiser on the chassis and drivetrain of a new Tundra TRD.  And there is one small addition that we are putting in, a supercharger.

Keep watching this project, it is going to be killer!

This is the easy part of the build where we get to grind, cut and disassemble.  Then the measuring and fabrication starts happening.

We are working on the firewall and interior body fabrication.

Also, the new set of tires are on.

Alex is working on the cutting and welding required to bring the rear the cab forward to allow room for the flat bed.1967 Landcruiser Side of rear cab1967 Landcruiser Top of rear cab

Rear of cabdsc02080

The TRD Supercharger arrived today for the 1967 Toyota.  I think this should help this big vehicle get up and go!

1967 Toyota -  Supercharger Accessories1967 Toyota - Supercharger

Dave is working on getting the supercharger installed on this 1967 Toyota Landcruiser.

1967 Landcruiser - Supercharger 11967 Landcruiser - Supercharger 2

Brett and Alex are continuing to work on welding, cutting, grinding and smoothing on the ’67 Landcruiser.

Car RestorationCar RestorationCar RestorationCar RestorationCar RestorationCar RestorationCar RestorationCar RestorationCar RestorationCar Restoration

Brett continues to weld bend and hammer this 1967 Toyota back to it’s original condition.

Car RestorationCar Restoration

Brett continues on with the metal fabrication for the 1967 Toyota landcruiser.

Car RestorationCar Restoration

Brett is working on smoothing out the body of the 1967 Landcruiser.

Car RestorationCar RestorationCar Restoration

Brett contiues to work the body for this part of the car restoration on the 1967 Toyota.

Car RestorationCar RestorationCar RestorationCar RestorationCar Restoration

Brett continues to work on the body work for this car restoration.

Car RestorationCar RestorationCar Restoration

Mike is finishing off the rear side body work for this classic car restoration.  Next step is paint which is just around the corner.

Car RestorationCar Restoration

The body work on the roof panel and the rear cab panel are almost completely done for this classic car restoration.

Classic Car RestorationClassic Car RestorationClassic Car Restoration

Mike is done now working of finishing up the body work on the hood.

Muscle Car RestorationMuscle Car Restoration

The team is setting the body down on the frame today for final fitment.

Car RestorationCar RestorationCar RestorationCar Restoration

The techs got the front end of the Toyota test fit on the frame before prime.

Car Restoration

Mike is making sure that the front end of the Toyota is square.

Car RestorationCar Restoration

Now that Mike is done with making sure the front clip of the Toyota is square is is finishing all the welding and body work to get it ready to go to primer.

Car RestorationCar Restoration

Now that Mike is done with the welding of the front end, he can finish smoothing it out with a skim coat of body filler.

Car RestorationCar Restoration

Mike is making a custom aluminum plate to cover where the old license plate went.

Car RestorationCar RestorationCar Restoration

Mike is working on installing the body mounts today for the Toyota Landcruiser.

Car RestorationCar Restoration

Mike is done with the dash installation and is working on mocking up the rear seat.  The vehicle will hopefully be moving into prime by the end of this week.

Car RestorationCar RestorationCar RestorationCar RestorationCar Restoration

Mike is removing the glass from the Landcruiser before it moves into priming.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

Dan just finish priming the fenders for the Landcruiser, next will be the cab.

Now that Ralph is done with the front end for the Landcruiser he is working out some minor items on the cab before it gets primed.

Ralph is still working on the Landcruiser taking care of some of the smaller imperfections.

Ralph is working on the doors for the Toyota today.  A few more body items to take care of and the vehicle will be ready to move into primer and paint.

The inside of the doors have been painted.

Ralph now has the body finished up for primer and has pulled off the cab to put some final touches on the frame.

Ralph is working on welding on some of the mounts on the Toyota frame and measuring everything to make sure it is square before the body goes back on.

The cab of the landcruiser is primed and ready to get blocked down for paint.

Alex is finishing up with the body work inside the cab for the Toyota so it can go over to Dan for paint.

Alex is grinding down a few spots to repair on the inside of the cab for the 1967 Toyota Landcruiser.

The inside of the Landcruiser has been primed and we are sanding it down today.  Tomorrow the inside will get painted.

1967 Toyota Landcruiser1967 Toyota Landcruiser

The inside of the Landcruiser is fully painted.  Next will be blocking the outside for paint.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

We are block sanding down the exterior of the Landcruiser body to prep it for paint.  This will get the body perfectly straight.  Next we will reprime the vehicle, then scuff it and paint it.

1967 Toyota Landcruiser

The last coat of primer is dry and ready to be sanded.

The 1967 Toyota Landcruiser is painted and ready to go over to the assembly and mechanical departments.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

Here are a few pictures of the what we have painted so far out of the booth.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

The Landcruiser is painted and ready for reassembly.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

The body for the Landcruiser is getting set down on the frame for the last time.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

We are moving forward with wrapping up the mechanical work for the Toyota.  Today we are getting the booster/master assembly installed and hanging the pedals.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

We are working on getting all the wiring and fuse boxes hooked up today on the Toyota Landcruiser.  This process will take a couple of days to complete.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

We are still working on the wiring and tranny cover for the Toyota.

1967 Toyota Landcruiser1967 Toyota Landcruiser

Finalizing dash wiring and fuse block installation.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

Custom made transmission tunnel cover.

1967 Toyota Landcruiser

Steering shaft column installed.

1967 Toyota Landcruiser

Test fitting the fenders, hood and front cowl.

1967 Toyota Landcruiser

All front end panels fit on the vehicle.

1967 Toyota Landcruiser

Building brackets and installing for the fuse block, radiator and a/c components.

1967 Toyota Landruiser1967 Toyota Landruiser1967 Toyota Landruiser1967 Toyota Landruiser

The battery is mounted, intercooler resivor is installed and intercooler piping is being run.  We are also working on wiring and installing the front lights.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

Chris is working on fabricating and installing the new flatbed for the Toyota.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

Alex is working on getting the bed sides fabricated for the Toyota and the metal part of the bed is in the paint booth for paint.

1967 Toyota Landcruiser1967 Toyota Landcruiser

The bed for the Landcruiser has ben sprayed with bedliner.

1967 Toyota Landcruiser

Alex is hanging the doors and working on the wood bed for the Toyota today.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

The wood sides for the bed have been painted and reinstalled.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

John is working on replacing the front axles for the chassis of the Toyota.

1967 Toyota Landcruiser

John is working on setting up the gauges in the dash and fabricating retro style knobs to work with the modern control panel off the 2006 Tacoma.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

We are working of finishing up retro modification of the dash for the Landcruiser.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

Measuring out the rear bumper height.

1967 Toyota Landcruiser

John is working on finishing up the fabrication and body work for the Toyotas lower dash.

1967 Toyota Landcruiser

John has finished prepping the lower dash for paint.

1967 Toyota Landcruiser

John is working on welding up a glove box housing for the Toyota.

1967 Toyota Landcruiser1967 Toyota Landcruiser

John is working on installing the window channels and windows for the Landcruiser.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

Ralph is getting the Toyota set up to install the new Smittybuilt bumpers.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

The front and rear bumpers and the nerf bars are installed.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

Jake is working on fabricating the metal door panels for the Landcruiser today.

1967 Toyota Landcruiser

The new door panels and rear panel are painted and installed.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

The seats are in for the Landcruiser.

1967 Toyota Landcruiser

The Toyota is almost completed.  The pictures below are of the dash almost assembled, the bed finished with stainless strips and hold downs and just a nice front shot of the vehicle.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

The toolbox has been painted in Rhino liner.

Now that Dan is done with the paint touch ups he is reassembling the bed for the truck.

1967 Toyota Landcrusier

All paint touch ups are done, mirrors are painted and vehicle is reassembled.

1967 Toyota Landcruiser1967 Toyota Landcruiser

Installing the mudflaps, door handles and window cranks.

1967 Toyota Landcruiser1967 Toyota Landcruiser1967 Toyota Landcruiser

Less rust, more metal.

Car RestorationCar RestorationCar Restoration

Body is out of etch prime and Rob is continuing on with the finishing body work.

Car RestorationCar RestorationCar RestorationCar RestorationCar Restoration

Brett has started to weld in new metal to patch where we found rust holes from blasting.

Car RestorationCar Restoration

Brett continues to brace and weld in new metal where the rust was found on the Toyota.

Car RestorationCar RestorationCar RestorationCar RestorationCar RestorationCar Restoration

Mike is working on setting up the hood hold downs today.

1967 Toyota FJ

, , ,